Welcome
(0 item) - $0.00

You have no items in your shopping cart.

1-800-882-3711

section

Stainless Steel Exhaust Tubes

For exhaust system performance and durability, Classic Tube offers 304 (16 gauge) brushed stainless in the parts you need to build your custom system:

16 GAUGE (.065)

Straight Length: by the foot (OD 3/4" to 5")

Mandrel Bent:

U-Bends (180°)

J-Bends (180°)

90° Bends

45° Bends

15° Bends

 

(OD 3/4" to 4")

(OD 3/4" to 2-1/2")

(OD 3/4" to 5")

(OD 3/4" to 4")

(OD 3/4" to 3")

Exhaust Pipe

Use 5356 filler rod for maximum strength

Use 4043 filler rod for maximum corrosion resistance

Aluminum Intake/Cooling System Tubes

For Intake and Cooling systems, Classic Tube offers 6061 Aluminum (16 gauge), .065" wall in the parts you need to build your custom system:

Straight Length: by the foot (OD 3/4" to 5")

Mandrel Bent:

U-Bends (180°)

90° Bends

45° Bends

 

(OD 3/4" to 4")

(OD 3/4" to 5")

(OD 3/4" to 3")

exhaust_tubes

This Aluminum tubing is the least expensive and most versatile of the heat treatable alloys. In the annealed O condition it has good formability for bending. Aluminum is not recommended as an exhaust system material.

Use 308 filler rod to weld 304 to 304

Use 309 filler rod to weld 304 to mild steel

 


 

 

Exhaust Tube

For U-bends

Determine the Center Line Radius (CLR) by measuring across the outside edges of the bend, subtracting the tubing O.D., and dividing by 2.

Note:Leg lengths are approximate; usually within +/- .25".

Straight Length Tubing

Straight tubing is sold by the foot, based on the total length of the tubing.

It is cut to the length you specify.

Lengths up to 8 feet can be shipped UPS.